Recent pages

Edit
page

New
page

Print
page
Page last modified 11:20, 13 Mar 2015 by Helge Rottmann
0

Synthesizer module: installation and test

From $1

    Table of contents
    1. 1. Cabeling
    2. 2. Test procedure

    Version as of 00:17, 19 Apr 2025

    to this version.

    Return to Version archive.

    View current version

    Cabeling

    • Connect your 10MHz signal to the backside 5/10MHz pin

    Test procedure

    • Power on the clock module.
    • Connect one of the frontside pins labeled 0-3 to a spectrum analyzer. Verify that you see a line that is peaking at 2048 MHz.
    • Check the peak power level. The frontside pins labeled 0-3 provide the clock with decreasing power levels. Select the pin that gives a power level in the targeted range (0 to -3dBm)
    • Connect the selected pin with the "clk" pin on the frontside of the R2DBE.

     
    Powered by MindTouch Core