Module labeling

Important:

Every time a set of modules is being initialized a sticker has to be put on each of the 4 modules of this set containing the following information:

set = {set number}
slot= {slot number}

{slot number} should indicate the slot the module has been in upon intialization

{set number}: should be identical for all four modules. The first 4 modules to be used in the observations should receive set number=1, in case a second (or third) set of modules will be used later during the observations these should receive an incremented set number (e.g. 2, 3, ...)

If you ever re-initialize the modules, update the stickers!