Noise generator

From $1

    Table of contents
    1. 1. Cabeling
    2. 2. Setup
    3. 3. Testing
    4. 4. Open questions

    Version as of 10:20, 9 May 2025

    to this version.

    Return to Version archive.

    View current version

    Cabeling

    • Connect USB cable to a computer preferably running Windows (only needed for first time setup)
    • Connect the ethernet cable to your local network
    • Connect the backside pin labeled "Tone In" to a signal generator

    Setup

    • Connect your Windows PC via USB
    • On your PC install the "mini-circuits RF switch software" (http://194.75.38.69/softwaredownload...ller_Setup.zip)
    • Open the "mini-circuits RF switch software" and press the "USB" button. Then hit "Ethernet config"
    • Write down the mac addres of the ethernet device (will be used later). Set the network mode to DHCP.

    Testing

    Open questions


     
    Powered by MindTouch Core